Click Pictures for larger view

 

 

bonnet   bonnet
I decided to stop making the original side panel cause i didn't like it and made a start on the plug for the bonnet instead   I can't draw very well and it's too much hassle to draw up the body panels on the computer so i'm designing the bonnet as i go along. There are endless things you can use to make up a plug for fibreglass mouldinging but for me personally i went with using metal cause thats what i'm used to
bonnet   bonnet
For me i find using metal for the plug to be good because you can bend metal to the shape your after and it holds that shape , wood , plaster, foam etc etc can also be used but i may as well use what i have lying around here.   The plan is that after the bonnet is fibreglassed that it will be hinged at the rear of the bonnet so that i can flip it open rather than lift it off all the time.
bonnet   bonnet
Here i have the frame work all made and have rivited and welded on scrap panel steel that i cut out of old washing machine bodies that i got from the scrap yard.   Next stage is to cover it in body filler and then sand it down to the required shape etc

 

 

 

 

Previous page - Next Trike page